|
With potassium carbonate;palladium diacetate; 2,2'-bis-(diphenylphosphino)-1,1'-binaphthyl; In ISOPROPYLAMIDE; at 60℃;Combinatorial reaction / High throughput screening (HTS); |
Step 2. Catalytic amination of the solid supported 8-iodo-l-methyl-4,5-dihydro- lH-pyrazolo [4,3-h] quinazoline-3-carboxamide; <n="82"/>Using a 4 niL Argonaut Trident synthesizer cassette, 200 mg (0.11 mmol) of the resin from step 1 above, were charged into separate vials. To each of the reactor vials flushed with argon, finely divided potassium carbonate (0.15 g, 1.1 mmol), palladium acetate [Pd(OAc)2] (2.5mg, 0.011 mmol, 10%), (HK)-BINAP (6.8 mg, 0.011 mmol, 10%) and the corresponding amine (0.22 mmol, 2 equivalents) in degassed (argon) dimethyacetamide (2 mL) were added. The resulting mixture was agitated at 600C for 10 hours on the Argonaut Trident Automated Library Synthesizer (ALS) station. The Trident ALS station was programmed to continuously mechanically agitate the resin at 6O0C while a nitrogen gas "sparge" was incorporated to re-suspend the scarcely soluble potassium carbonate. Nitrogen gas sparging was incorporated once per hour, for a 30 second duration, throughout the 16-hour heating cycle.The resin was drained from the synthesis cocktail and washed using the Argonaut Trident External Agitation Thermal Unit (EATU) synthesis station with DMA (3 x 2 mL, 5 min.). The above catalytic amination cycle was repeated a second time using the previously described procedure.Upon completion of the second amination cycle, the resin was drained from the synthesis cocktail and washed using the Argonaut Trident EATU synthesis station with DMF (1 x 2 mL, 5 min.), with water (1 x 2 mL, 5 min.), with DMF/water (1 : 1) (3 x 2 mL, 5 min.), with DMF (3 x 2 mL, 5 min.), with methanol (3 x 2 mL, 5 min.) and with DCM (3 x 2 mL, 5 min.). |