Home Cart 0 Sign in  

[ CAS No. 106-90-1 ] {[proInfo.proName]}

,{[proInfo.pro_purity]}
Cat. No.: {[proInfo.prAm]}
HazMat Fee +

There will be a HazMat fee per item when shipping a dangerous goods. The HazMat fee will be charged to your UPS/DHL/FedEx collect account or added to the invoice unless the package is shipped via Ground service. Ship by air in Excepted Quantity (each bottle), which is up to 1g/1mL for class 6.1 packing group I or II, and up to 25g/25ml for all other HazMat items.

Type HazMat fee for 500 gram (Estimated)
Excepted Quantity USD 0.00
Limited Quantity USD 15-60
Inaccessible (Haz class 6.1), Domestic USD 80+
Inaccessible (Haz class 6.1), International USD 150+
Accessible (Haz class 3, 4, 5 or 8), Domestic USD 100+
Accessible (Haz class 3, 4, 5 or 8), International USD 200+
Chemical Structure| 106-90-1
Chemical Structure| 106-90-1
Structure of 106-90-1 * Storage: {[proInfo.prStorage]}
Cart0 Add to My Favorites Add to My Favorites Bulk Inquiry Inquiry Add To Cart

Quality Control of [ 106-90-1 ]

Related Doc. of [ 106-90-1 ]

Alternatived Products of [ 106-90-1 ]

Product Details of [ 106-90-1 ]

CAS No. :106-90-1 MDL No. :MFCD00005138
Formula : C6H8O3 Boiling Point : -
Linear Structure Formula :- InChI Key :RPQRDASANLAFCM-UHFFFAOYSA-N
M.W : 128.13 Pubchem ID :7836
Synonyms :

Safety of [ 106-90-1 ]

Signal Word:Danger Class:6.1,3
Precautionary Statements:P501-P261-P270-P262-P240-P210-P233-P243-P241-P242-P271-P264-P280-P272-P370+P378-P303+P361+P353-P333+P313-P301+P330+P331-P362-P301+P310+P330-P302+P350+P310-P304+P340+P310-P305+P351+P338+P310-P403+P233-P403+P235-P405 UN#:2929
Hazard Statements:H310-H301+H331-H314-H317-H225 Packing Group:
GHS Pictogram:

Application In Synthesis of [ 106-90-1 ]

* All experimental methods are cited from the reference, please refer to the original source for details. We do not guarantee the accuracy of the content in the reference.

  • Downstream synthetic route of [ 106-90-1 ]

[ 106-90-1 ] Synthesis Path-Downstream   1~4

  • 1
  • [ CAS Unavailable ]
  • [ 9067-32-7 ]
  • [ CAS Unavailable ]
YieldReaction ConditionsOperation in experiment
With tetrabutylammomium bromide; triethylamine In water at 20 - 60℃; for 25h; 1.III 1% Hy was reacted with a 20-fold molar excess of glycidyl acrylate and equal amounts of triethylamine and tetrabutylammonium bromide in water for 24 hours at room temperature. The reaction was continued at 60° C. for 1 hour. After the reaction, the solution was precipitated in acetone, dissolved in DI water precipitated a second time in acetone, and dissolved again in DI water to remove excess reactants. The GAHy solution was lyophilized and stored.
  • 2
  • [ 106-90-1 ]
  • 6-chlorotoluene-2-diazonium chloride [ No CAS ]
  • [ 87-63-8 ]
  • α-chloro-β-(3-chloro-o-tolyl)2,3-epoxypropyl propionate [ No CAS ]
YieldReaction ConditionsOperation in experiment
70% With acetic acid; sodium nitrite;copper(l) chloride; In hydrogenchloride; water; acetone; EXAMPLE 16 Preparation of alpha-chloro-beta-(3-chloro-o-tolyl)2,3-epoxypropyl propionate. 141.5 g of 6-chloro-o-toluidine are slowly added with agitation to a mixture of 200 ml of concentrated HCl and 2.0 ml of acetic acid in a 3-liter reactor. The hydrochloride solution thus formed is cooled to 0 C., and 150 ml of an aqueous solution containing 74 g of NaNO2 are added drop by drop over a period of 15 minutes. After filtering the 6-chlorotoluene-2-diazonium chloride solution is added to a mixture of 170 ml of glycidyl acrylate and 240 ml of acetone; whereafter a solution of 6 g of CuCl in 60 ml of HCl is added at a temperature of 25 C. over a period of 2 hours. The evolution of nitrogen ceases completely after 2 hours reaction time at 25 C. The alpha-chloro-beta-(3-chloro-o-tolyl)propionate of 2,3-epoxypropyl is extracted in ether and the ethereal extract is washed in water. After drying on CaCl2 and removal of the solvent the residue is distilled at low pressure. 200 g, corresponding to a 70% yield, of an oil distilling between 195 and 200 C. at 0.1 mm Hg are obtained. Analysis: % Cl found: 28 % Cl calculated: 27
  • 3
  • [ 106-90-1 ]
  • [ 496-46-8 ]
  • C28H38N4O14 [ No CAS ]
YieldReaction ConditionsOperation in experiment
at 50℃; 10 mol of <strong>[496-46-8]glycoluril</strong> (Sigma-Aldrich) was diluted in propylene glycol monomethyl ether acetate. While the solution was maintained at 50 C., a solution obtained by diluting 40 mol of glycidyl acrylate (Sigma-Aldrich) in the same solvent was slowly added thereto to allow the mixture to react. The obtained solution was separated through a column, and then the solvent was removed by using vacuum distillation, thereby obtaining a compound represented by [Formula 11]. The procedure was repeated to prepare a sufficient amount of the compound of [Formula 11]. (0093) (0094) The structure was confirmed through 1H-NMR. 5.80, 6.05, 6.43 (-CH=CH2), 3.43, 4.28, 4.43, 4.44 (aliphatic H), 2.0 (-OH)
  • 4
  • [ 106-90-1 ]
  • [ 21850-57-7 ]
  • [ 3524-68-3 ]
  • C44H62O15 [ No CAS ]
YieldReaction ConditionsOperation in experiment
weight 30g of methyl eleostearate D-A reaction product in a three-necked flask, and added 0.275g hydroquinone, place in the oil bath and install the stirring device, set the speed to 200r/min. Warming up to 60 C, weigh 0.825 g of N, N-dimethylethanolamine, stir well and heat to 80 C, and then 23 g of <strong>[3524-68-3]pentaerythritol triacrylate</strong> was slowly dropped into the three-necked flask, drip within 5 minutes, continue to heat up to 120 C, after 4 hours of reaction the absorption peak of the anhydride at 1849 and 1778 cm-1 disappeared in the infrared spectrum. cool down to 60 C, added 0.320 g of hydroquinone and 0.320 g of N, N-dimethylethanolamine, 20 minutes of incubation and then the temperature rose to 80 C and added 11g of glycidyl acrylate, continue to heat up at 100 C and continue to react for 4h, until the acid value of the reaction system is lower than 3mgK0H/g, after the reaction is over, adjust the pH at 7.0 using a 10 wt. % sodium carbonate solution, and then transferred to a separatory funnel, washed with saturated brine and allowed to separate layers and separate the lower layer. And then dissolved the product in dichloromethane, and then wash with hot deionized water, at this point, the water is found in the upper layer and the product is in the lower layer, continue to wash 5 times with water. Finally, add an appropriate amount of anhydrous sodium sulfate to fully dry and remove water, use a rotary evaporator to remove methylene chloride, obtained Tung Oil-Based Multifunctional UV Curing Active Monomer.
Same Skeleton Products
Historical Records