Home Cart 0 Sign in  
X

[ CAS No. 46049-49-4 ] {[proInfo.proName]}

,{[proInfo.pro_purity]}
Cat. No.: {[proInfo.prAm]}
HazMat Fee +

There will be a HazMat fee per item when shipping a dangerous goods. The HazMat fee will be charged to your UPS/DHL/FedEx collect account or added to the invoice unless the package is shipped via Ground service. Ship by air in Excepted Quantity (each bottle), which is up to 1g/1mL for class 6.1 packing group I or II, and up to 25g/25ml for all other HazMat items.

Type HazMat fee for 500 gram (Estimated)
Excepted Quantity USD 0.00
Limited Quantity USD 15-60
Inaccessible (Haz class 6.1), Domestic USD 80+
Inaccessible (Haz class 6.1), International USD 150+
Accessible (Haz class 3, 4, 5 or 8), Domestic USD 100+
Accessible (Haz class 3, 4, 5 or 8), International USD 200+
3d Animation Molecule Structure of 46049-49-4
Chemical Structure| 46049-49-4
Chemical Structure| 46049-49-4
Structure of 46049-49-4 * Storage: {[proInfo.prStorage]}
Cart0 Add to My Favorites Add to My Favorites Bulk Inquiry Inquiry Add To Cart

Quality Control of [ 46049-49-4 ]

Related Doc. of [ 46049-49-4 ]

Alternatived Products of [ 46049-49-4 ]

Product Details of [ 46049-49-4 ]

CAS No. :46049-49-4 MDL No. :MFCD10697676
Formula : C9H11NO2 Boiling Point : -
Linear Structure Formula :- InChI Key :-
M.W : 165.19 Pubchem ID :-
Synonyms :

Calculated chemistry of [ 46049-49-4 ]

Physicochemical Properties

Num. heavy atoms : 12
Num. arom. heavy atoms : 6
Fraction Csp3 : 0.33
Num. rotatable bonds : 1
Num. H-bond acceptors : 3.0
Num. H-bond donors : 1.0
Molar Refractivity : 44.83
TPSA : 44.48 Ų

Pharmacokinetics

GI absorption : High
BBB permeant : Yes
P-gp substrate : No
CYP1A2 inhibitor : No
CYP2C19 inhibitor : No
CYP2C9 inhibitor : No
CYP2D6 inhibitor : No
CYP3A4 inhibitor : No
Log Kp (skin permeation) : -6.77 cm/s

Lipophilicity

Log Po/w (iLOGP) : 1.97
Log Po/w (XLOGP3) : 0.76
Log Po/w (WLOGP) : 0.79
Log Po/w (MLOGP) : 0.52
Log Po/w (SILICOS-IT) : 1.33
Consensus Log Po/w : 1.07

Druglikeness

Lipinski : 0.0
Ghose : None
Veber : 0.0
Egan : 0.0
Muegge : 1.0
Bioavailability Score : 0.55

Water Solubility

Log S (ESOL) : -1.65
Solubility : 3.72 mg/ml ; 0.0225 mol/l
Class : Very soluble
Log S (Ali) : -1.27
Solubility : 8.79 mg/ml ; 0.0532 mol/l
Class : Very soluble
Log S (SILICOS-IT) : -2.24
Solubility : 0.959 mg/ml ; 0.00581 mol/l
Class : Soluble

Medicinal Chemistry

PAINS : 0.0 alert
Brenk : 0.0 alert
Leadlikeness : 1.0
Synthetic accessibility : 2.56

Safety of [ 46049-49-4 ]

Signal Word:Danger Class:8
Precautionary Statements:P280-P302+P352-P305+P351+P338+P310 UN#:2735
Hazard Statements:H315-H318-H335 Packing Group:
GHS Pictogram:

Application In Synthesis of [ 46049-49-4 ]

* All experimental methods are cited from the reference, please refer to the original source for details. We do not guarantee the accuracy of the content in the reference.

  • Downstream synthetic route of [ 46049-49-4 ]

[ 46049-49-4 ] Synthesis Path-Downstream   1~2

  • 1
  • [ 4442-59-5 ]
  • [ 46049-48-3 ]
  • [ 46049-49-4 ]
YieldReaction ConditionsOperation in experiment
With chiral stationary phase including (R)-naphthylethyl-carbamate-functionalized CF6 In ethanol; n-heptane; trifluoroacetic acid at 20℃; 35.12 In addition to the foregoing, numerous other chromatographic separations using a column bonded with a CSP including a derivatized cyclofructan residue were carried out. Tables 5-9 list some additional examples of chromatographic separations using a column bonded with a CSP of the present invention. AU examples of chromatographic separations using columns bonded with CSPs of the present invention were carried out using the following experimental conditions and procedures.|0132| The high performance liquid chromatography (HPLC) column packing system was composed of an air driven fluid pump (HASKEL, DSTV- 122), an air compressor, a pressure regulator, a low pressure gauge, two high-pressure gauges (10,000 and 6,000 psi), a slurry chamber, check valves, and tubings. The CSPs were slurry packed into a 25 cm x 0.46 cm (inner diameter, I. D.) stainless steel column.|0133| The HPLC system was an Agilent 1 100 system (Agilent Technologies, Palo Alto,CA), which consisted of a diode array detector, an autosampler, a binary pump, a temperature- controlled column chamber, and Chemstation software. All chiral analytes were dissolved in ethanol, methanol, or other appropriate mobile phases, as indicated. For the LC analysis, the injection volume and flow rate were 5 μL and 1 mL/min, respectively. Separations were carried out at room temperature (~20 0C) if not specified otherwise. The wavelengths of UV detection were 195, 200, 210, and 254 nm. The mobile phase was degassed by ultrasonication under vacuum for 5 min. Each sample was analyzed in duplicate. Three operation modes (the normal phase mode, polar organic mode, and reversed phase mode) were tested, unless indicated otherwise. In the normal phase mode, heptane with ethanol or isopropanol was used as the mobile phase. In some cases, trifluoroacetic acid (TFA) was used as an additive, as indicated. The mobile phase of the polar organic mode was composed of acetonitrile/methanol and small amounts of acetic acid and triethylamine. Water/acetonitrile or acetonitrile/acetate buffer (20 mM, pH = 4.1 ) was used as the mobile phase in the reversed-phase mode.|0134| Two different supercritical fluid chromatographic instruments were used. One was a Berger SFC unit with an FCM 1200 flow control module, a TCM 2100 thermal column module, a dual pump control module, and a column selection valve. The flow rate was 4 mL/min. The cosolvent was composed of methanol/ethanol/isopropanol = 1 : 1 : 1 and 0.2% diethylamine (DEA). The gradient mobile phase composition was 5% cosolvent hold during 0- 0.6 min, 5-60% during 0.6-4.3 min, 60% hold during 4.3-6.3 min, 60%-5% during 6.3-6.9 min, and 5% hold during 6.9-8.0 min. The other SFC system was a Jasco (MD, USA) system comprised of an autosampler unit (AS-2059-SF Plus), a dual pump module (PU-2086 Plus), a column thermostat module (CO-2060 Plus), a UV/Vis detector (UV-2075 Plus), and a back pressure regulator module (SCH-Vch-BP). Unless otherwise specified, the mobile phase was composed of CCVmethanol (0.1 % TFA or 0.1% diethylamine). The flow rate was 3 mL/min.|0135| For the calculations of chromatographic data, the "dead time" to was determined by the peak of the refractive index change due to the sample solvent or determined by injecting l ,3,5-tri-/e/-/-butylbenzene in the normal phase mode.
  • 2
  • [ 3663-80-7 ]
  • [ 46049-49-4 ]
Same Skeleton Products
Historical Records